When you’re ready to remodel your bathroom toilet, you do not have to remove the old tiles, if you are thinking of saving money. A few good tips that will help you work are easier when you paint on the tiles or existing tiles.
Instructions :
Selecting paint and supplies
- Compare different types of paint suggested for tiles or ceramic tiles and ask how to apply them.
- Choose the correct primer if necessary; apply many types of latex paint require a primer base. An oil-based paint or alkyd may not need it. Be sure to read the manufacturer’s instructions. One of the best types of paints for tiles is the epoxy type; it is tough and durable and you can buy in aerosol cans.
- Buy the painting and the elements; do not forget to get masking tape, rags, gloves and mask. Decide whether you will use spray cans or spray gun; if not, you will also need to purchase foam paint brushes and rollers.
Surface preparation
- Clean bathroom tiles with a mixture of vinegar and ammonia to remove accumulated debris. Rinse thoroughly and allow drying. For difficult residues, you can buy disodium phosphate in a paint shop but be sure to follow the manufacturer’s instructions carefully.
- Sand the tiles slightly, just enough to spare a little. This will help the primer and paint adhere to the tile. Vacuum and clean to remove excess sanding dust.
- Fill the joints if the caulk around the tub and necessary and clean.
- Remove any device; flower shower and faucet handles if possible. If you cannot remove them, cover them well with a plastic bag.
- Protect the surrounding area with masking tape; be especially careful with the bath and protects the surrounding walls and recessed soap.
Painting tiles
- First paint the edges where the tiles meet the wall and ceiling. Also do around appliances and not get any side.
- Sprinkle the tile with the can of spray paint or spray gun. Practice spraying a piece of cardboard first. The secret is to start spraying paint an inch or 2 (2.5 to 5 cm) before it hits the tile, and conclude spraying an inch or 2 (2.5 to 5 cm) beyond the tile. Paint with gentle movements, using several light coats.
- Use a disposable foam roller if you’re going to paint by hand. The foam tends to leave very few marks and a roller is better than a brush. The strokes can be marked if you use a brush, either foam or natural bristle.
- Follow the manufacturer’s instructions for drying time between coats. When you have finished painting, do not use the shower or bath for at least 48 hours, depending on the humidity in your home.